Click Here for Special Offers! Close Offers
Extractigator Pulling Tool

Extractigator Pulling Tool

Part Number: EXTRACTIGATOR
Availability: -2 | Currently on back order, order today and we'll ship when stock arrives!
Extractigator Pulling Tool
Your Price: $199.00
The Extractigator will work on most woody stem plants from paper thin up to 2” in diameter. The Extractigator Junior is a lighter version of the original Extractigator. The Junior shares the same profile, only is made from thinner material with a shorter handle. The Jaws of the Junior are limited to 1.5” diameter plant, but recommended for plants under 1” in diameter. If all you have are smaller diameter saplings... the Extractigator Junior will work fine for you!!

How is The Extractigator different from competitor devices?

The answer is in the design. Competitor models are designed in an "L" shape. The pivot (or fulcrum) is a fixed distance from the plant to be removed, and requires a large amount of operator effort at the start of the removal – at an uncomfortable vertical level requiring much physical strength.

The design of the Extractigator is one which has a variable pivot distance, allowing the operator maximum force applied to the plant at the beginning of the pull (when it is needed the most) with the lowest amount of operator effort. The handle is in a position which allows the operator to use body weight as the advantage – not physical strength. As the plant is removed, the pulling distance is increased.

One size is all you need. The jaws open to a full 2”, yet can pull out delicate- stemmed plants such as thistles. The jaws are designed to resist clogging from bark or debris, while still applying full gripping force. The moving components are kept above ground level, thus are not effected by mud and dirt, unlike some competitor devices.

The construction of the Extractigator is of high quality steel, professionally welded with strength and weight as considerations. Grade 8 High Tensile steel bolts with Nylock (self locking) nuts are used as the pivot pins, as they have over 4 times the strength of normal steel.

The Extractigator is fully guaranteed for materials and manufacturing. Each Extractigator is hand made in British Columbia, Canada, and individually inspected before shipping.

That’s why the Extractigator is Extracti-GREAT-ER!

For the technical people...

Competitors' products have up to 6:1 pulling power. That is, if the handle is 60” long, the distance from the plant to the pivot (fulcrum) is 10”. If you apply 10lbs force to the end of the vertical handle, you are applying 60lbs of uprooting force.

The Extractigator begins the pull with a minimum 12:1 ratio, with the handle at a height which allows the operator to use body weight as the pulling force. If the operator applies 10lbs of body weight to the end of the handle, he or she is applying initially 120lbs of uprooting force to the plant. After the initial pull from the ground, less effort is required. The fulcrum distance increases to remove the entire plant. With the minimum 12:1 ratio - If the operator applies 100lbs of body weight to the end of the handle… that’s 1200 lbs of uprooting force!!

Depending on thickness of plant stock, the force applied can be up to 24:1 !
That’s over 4 times the pulling power of competitive models!

Related Items

Recently Viewed Items