The OF 2200 is our most powerful router. It can easily plunge into 8/4 hard maple and make a 1/2in. groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop.
The Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method.
With 80mm of travel, the plunge depth of the OF 2200 is phenomenal. The collet actually plunges 10mm below the base of the router providing another option for bit changes. Use the micro-adjustment knob to fine tune plunge depth in increments of 1/256in. (1/10mm). The four position depth stop turret provides pre-configurable plunge depths including a 5/64in. (2mm) finishing pass setting.
The OF 2200 Router features a Triple Bearing Design which dampens spindle and bit deflection. With bearings at the top, middle and bottom, the spindle is less likely to wobble. This is particularly important considering the sheer power of the OF 2200 and the centrifugal forces exerted with spinning large bits at speeds up to 22,000 RPM.
Work smarter knowing that the plunge depth of the OF 2200 is set securely. The locking mechanism actuates against both of the anodized plunge columns to prevent movement. The plunge depth is locked with a single twist of the locking knob located at your fingertips on the router's handle.
- Chip catcher
- Collet 1/2in.
- Dust extraction hood
- Standard U.S. guide bushing adapter