Sawstop

SawStop JSS-120A60 Jobsite Saw Pro With Mobile Cart

Part Number: SAWJSS-120A60

Stock: 1

Shipping: Calculated at Checkout

  • IN STOCKOrder your's today!

  • FREE SHIPPING Item qualifies for free shipping on orders over $149 and under 40lbs.

  • HEAVY OR OVERSIZED ITEM Shipping will be calculated at checkout.

  • IN STORE PICK-UP Choose store location during checkout for in stock items.

Adding to cart… The item has been added
The 1.5 HP, 15 Amp SawStop Jobsite Saw is the standard in jobsite safety. Equipped with SawStop's patented blade braking technology, this saw delivers unmatched protection coupled with groundbreaking functionality. With the 1 Turn Elevation and Quicktilt features, users can raise and lower the blade with just 1 turn of the handwheel and quickly tilt the blade for bevel cuts saving valuable time. The solid T-Style Fence with Ergolock allows the fence to slide smoothly along the rails and locks in tight for accurate cuts. Simple, intuitive action extends the Mobile Cart for use and collapse the cart for transport and storage. This saw includes 1 standard brake cartridge, 1 40-tooth blade, 1 zero clearance insert, a collapsible rolling cart, micro blade guard and riving knife. Experience the precision, quality and safety of a SawStop saw wherever the job takes you.

  • Quickly and precisely crosscut and rip lumber, siding, flooring to the size that best fits your needs
  • SawStop jobsite saw is the ideal choice for building on the work site. construct cabinets, cut siding and sheet goods, fit flooring to size, and more. remodel your house from room to room with SawStop
  • Uses a 110-volt plug that fits in any 110-volt grounded wall outlet
  • 25-1/2 in. maximum rip to the right of the blade, 13-3/8 in. table depth and 3-1/8 in. maximum depth of cut at 90 degrees allow you to cut a wide range of stock sizes
  • 1.5 HP 15 Amp motor provides maximum power for continuous operation
  • Saw Stops patented safety system stops the spinning blade on contact with skin, keeping your fingers safe and reducing the chance of catastrophic injury the micro blade guard with anti-kickback pawls reduces the likelihood of kickback
  • Tool-free insert, blade guard and riving knife make it quick and easy to swap out depending on the type of cut rigid steel mobile base with foot pedal release and balanced weight distribution makes folding and unfolding the saw quick and easy
  • An on-board storage compartment and fence holster conveniently stores saw accessories for quick and easy access
  • High quality heat treated steel, carbide tipped, precision balanced with expansion slots to help reduce vibration, noise and heat buildup for high quality cutting and ripping both hardwoods and softwoods
  • 1 Turn Elevation and Quicktilt features allow users to raise and lower the blade with just 1 turn of the hand wheel and quickly tilt the blade for bevel cuts saving valuable time
  • SawStop recommends a 3/32 in. blade for the most accurate and precise cuts
  • Maximum depth of cut 2-1/8 in. at 45 and 3-1/8 in. at 90 for a variety of straight and bevel cuts
Includes:
  • Collapsible rolling cart
  • Standard brake cartridge
  • 40-tooth 10 in. blade
  • Miter gauge
  • JSS micro blade guard
  • Riving knife
  • 2 blade wrenches
  • Push stick
  • 3 mm hex key, 4 mm hex key and 5 mm. hex key
  • User's guide, assembly instructions poster
  • Hardware pack
  • Weight: 220.00 LBS
Motor Configuration120 VAC 60 Hz, Universal 1.5HP
Amperage15A
No Load RPM4,000
Cord Length116 in
Saw Dimensions31-3/4" W x 28-3/4" D x 15-1/2" H
Saw Dim. w Cart (folded, On End)26-1/2" W x 29" D x 45" H
Saw Dimensions w Cart (unfolded)48" W x 29" D x 36" H
Table Dimensions (retracted)31-1/4" W x 24-5/8" D
Weight (saw only)84 lbs
Weight (with cart)113 lbs
Shipping weight (with cart)137 lbs
Blade Diameter10"
Dado Diameter8"
Dado max. width13/16"
Bevel Angle Range-1 to 46
Blade TiltLeft
Max. depth of cut, blade at 03-1/8"
Max. depth of cut, blade at 452-1/8"
Max. rip right of blade (extended)25-1/2"
Max. rip left of blade9-3/4"
Arbor diameter at blade5/8"
Arbor Dado Capacity13/16" dado stack
Main bearing size62mm OD x 30mm ID x 16mm W
Second bearing size52mm OD x 25mm ID x 15mm W
Table in front of blade (max elev)6"
Table behind blade (max elev)7-3/8"
Miter Slots T-shaped dimensions.754" W x .413" D; "T" .956" W x .157" THK
Dust collection port diameter2-1/2" Outside/ 2-1/4" Inside
Riving knife/splitter thickness2.3mm (.090")
Blade guardPolycarbonate
Hand wheelEffective diameter 6.3"
BeltsPoly-V static dissipative belt
Blade40-tooth, prof. grade, 5/8" arbor
  • Weight: 220.00 LBS

Related Products